Zenoah flywheel air gap gauge tool. Works on most Zenoah and Chung Yang Rovan King Motor 30N engines. Allows for simple setting of proper gap between flywheel and coil.
Zenoah part # 3330-97310.
The Zenoah recommended gap is between .3 and .4mm
…
Zenoah 36mm piston with special factory molybdenum disulfide coating. This is a stock zenoah part # 57479-1001 that has had this special coating added. zenoah part# 584292101
The coating reduces friction slightly, and the reduced resistance results in slightly better performance and top RPMs.
These pistons do NOT include a piston ring, requires use of Zenoah pin washers and pin bearings.
Professionally coated at the Zenoah factory in Japan.
These pistons are a special promotion from Zenoah and may be available only for a…
Zenoah 4-bolt cylinder gasket (fits 4-bolt cylinder style engines). Also fits TS 4-bolt billet crankcases.
Zenoah part # 5772-31601 (old T2075-13120)
Fg part # 07706
Stock part on the Zenoah 4 bolt
G240, 270, 290RC Engines
G231, 260 PU, PUH and PUM engines
This gasket can be used on all CY 4 bolt motors. The gasket may need slight trimming near the transfer ports…
Zenoah G320RC +2 30mm Stroker Crankshaft
30 mm Stroke
will fit G320RC Only
+2mm (30mm) Stroker Crankshaft for Zenoah G320RC Engine
+2mm aftermarket stroker crankshaft (30mm stroke). For the Zenoah G320RC engine only.
Does NOT fit earlier Zenoah RC models
Same function as Zenoah part # 585816001, but with +2mm longer stroke (30mm stroke total)
Adding this +2mm stroker crank to your Zenoah G320RC engine will convert it to a…
Zenoah 32mm piston. New-style optimised piston as featured on 'red cap' engines for use with the .8mm piston ring.
PMW part # 4320
Zenoah part # T2071-41110
FG part # 07308/09
Stock Part on the
G230RC G240RC G231PUH G231PUM
Use Zenoah pistons with Zenoah top ends, CY top ends should use CY pistons…