Complete Zenoah 54mm clutch assembly. Fits Zenoah and Chung Yang engines with 54mm clutches.
Includes clutch shoes GT281,
Spring GT282,
2 clutch shoe mount bolts GT285,
2 shim washers GT287,
2 shoe washers GT288,
clutch case GT286,
4 clutch case mount bolts GT283,
clutch plate GT284,
and clutch plate bolt GT289 - everything necessary for installation, . PMW part #4329.…
Zenoah 36mm piston with special factory molybdenum disulfide coating. This is a stock zenoah part # 57479-1001 that has had this special coating added. zenoah part# 584292101
The coating reduces friction slightly, and the reduced resistance results in slightly better performance and top RPMs.
These pistons do NOT include a piston ring, requires use of Zenoah pin washers and pin bearings.
Professionally coated at the Zenoah factory in Japan.
These pistons are a special promotion from Zenoah and may be available only for a…
Zenoah 30mm (+2mm) stroker crankshaft for R/C engines.
Manufactured by Zenoah in Japan.
When using on a Zenoah brand motor, no additional parts are required. If using on a CY motor, the Zenoah bearing/washers must be used
Requires cylinder modified to accommodate the +2mm stroke.
Zenoah part# 57595-3101
*NOT FOR G320RC…
Zenoah ignition coil for RC engines. Comes as pictured, with red silicone cap and spring pre-installed.
PMW part #4340
Zenoah part # T2070-71200 (wtih red cap and spring added on)
FG part # 07328/8
Stock part on
Zenoah G230RC G260RC G240RC G270RC G290RC G320RC Engines
Can be interchanged with EE421on the
CY23 CY26 CY27 CY29 GP290 Engines
…