Displaying 1 to 10 (of 65 products)
Zenoah flywheel air gap gauge tool. Works on most Zenoah and Chung Yang Rovan King Motor 30N engines. Allows for simple setting of proper gap between flywheel and coil.
Zenoah part # 3330-97310.
The Zenoah recommended gap is between .3 and .4mm
…
- Manufacturer
- Zenoah
- Model
- dr330
- Quantity
- 3
Zenoah 2 Bolt Gasket Set Zenoah RC full gasket set, 2 bolt set for Zenoah G230RC, G260RC engines and CY CY23RC, CY26RC, CY27RC, CY29RC, GP290 engines.…
- Manufacturer
- Zenoah
- Model
- be150
- Quantity
- 2
Zenoah 36mm piston with special factory molybdenum disulfide coating. This is a stock zenoah part # 57479-1001 that has had this special coating added. zenoah part# 584292101
The coating reduces friction slightly, and the reduced resistance results in slightly better performance and top RPMs.
These pistons do NOT include a piston ring, requires use of Zenoah pin washers and pin bearings.
Professionally coated at the Zenoah factory in Japan.
These pistons are a special promotion from Zenoah and may be available only for a…
- Manufacturer
- Zenoah
- Model
- ca332md
1.0mm Piston ring for 32mm pistons.
Stock part on the CY23RC and CY23HR motors
CY part # 232-204321
…
- Manufacturer
- Zenoah
- Model
- ca468
- Quantity
- 2
Piston ring for CY 35mm big-bore kits as well as CY27RC / CY29RC engines…
- Manufacturer
- Zenoah
- Model
- ca482
- Quantity
- 4
Zenoah 4-bolt cylinder gasket (fits 4-bolt cylinder style engines). Also fits TS 4-bolt billet crankcases.
Zenoah part # 5772-31601 (old T2075-13120)
Fg part # 07706
Stock part on the Zenoah 4 bolt
G240, 270, 290RC Engines
G231, 260 PU, PUH and PUM engines
This gasket can be used on all CY 4 bolt motors. The gasket may need slight trimming near the transfer ports…
- Manufacturer
- Zenoah
- Model
- ca337 blue
- Quantity
- 11
DDM Replacement PTFE Carburetor Gasket for Billet Aluminum Zenoah G320RC/G320PUM Manifold…
- Manufacturer
- Zenoah
- Model
- av981b
- Quantity
- 1
Zenoah G320RC +2 30mm Stroker Crankshaft
30 mm Stroke
will fit G320RC Only
+2mm (30mm) Stroker Crankshaft for Zenoah G320RC Engine
+2mm aftermarket stroker crankshaft (30mm stroke). For the Zenoah G320RC engine only.
Does NOT fit earlier Zenoah RC models
Same function as Zenoah part # 585816001, but with +2mm longer stroke (30mm stroke total)
Adding this +2mm stroker crank to your Zenoah G320RC engine will convert it to a…
- Manufacturer
- Zenoah
- Model
- dd404b
- Quantity
- 1
Zenoah 32mm piston. New-style optimised piston as featured on 'red cap' engines for use with the .8mm piston ring.
PMW part # 4320
Zenoah part # T2071-41110
FG part # 07308/09
Stock Part on the
G230RC G240RC G231PUH G231PUM
Use Zenoah pistons with Zenoah top ends, CY top ends should use CY pistons…
- Manufacturer
- Zenoah
- Model
- ca312
- Quantity
- 1
New-style thinner piston ring (.8mm thick) for Zenoah 32mm engines.
Thinner ring allows for reduced friction, higher revs, and more power.
Fits 32mm bore piston. Zenoah part # T2071-41210 and 51244-6801 FG part # 07309/09
Part on the Zenoah G230RC G240RC G231PUH G231PUM…
- Manufacturer
- Zenoah
- Model
- ca315
- Quantity
- 2
Displaying 1 to 10 (of 65 products)