130936 Throttle Servo mounts (2) (Vekta 5)
Made from 6061, Vertigo Servo mounts are a solid upgrade from the stock plastic mounts that can flex under load
*sale is for mounts only servo & accessories are not included for demo of fit…
130933 Upper link mounts are now available..
We include 2 Socket head cap screws due to the design of the Vekta Diff housing. The rear cover has to tighten up to the diff housing to keep it sealed and at the same time tighten up to the upper link mount to keep it from moving, this requires some extra torque. In doing so we found it was easy to…
100607 Centre diff brace Vertigo Centre diff brace prevents the center differential bulkheads from flexing which keeps the spur gear from hitting the clutch cover/carrier and prevents teeth on the spur and pinion gear from chipping. - Brace secures to any clutch housing with a top brace mounting hole and to Vertigo Clutch housings via 2 - 6mm bolts to ensure the brace won't come loose and to also prevent the premature stripping of threads of only one mounting…
100669U Universal 23cc - G320 Open clutch housing, carrier brace kit for your Losi 5ive 2.0
The stock housing is very cramped and holds in heat, Vertigo Performance Clutch Carrier kit is wide open to let fresh air in and heat and clutch dust out.
Includes clutch housing, wide open clutch carrier, 2.0 transmission brace, 4mm 23cc-30.5cc adapter plate, hardware.
Fits 23cc-30.5cc, Losi 29cc, and G320 block engines.
This product is Silver in color
Includes larger 15x32x9mm bearings
…
Engine mount inserts and screws for 20T & 22T Pinion gear by Vertigo
Note: The 20t and 22t inserts are the same size and work with both the 20t and 22t hex gear.
The new Losi 5IVE-T 2.0 truck is not directly compatible to these inserts. They fit, but the spacing size is different.
Fit Losi 5iveT Rovan LT KM X2 & DTT…
Engine mount inserts and screws for 21T Pinion gear set of 5 by Vertigo
Fit Losi 5iveT Rovan LT KM X2 & DTT
** The new Losi 5IVE-T 2.0 truck is not directly compatible to these inserts. They fit, but the spacing size is different.…
10 years of making lockers for RC Cars we know what we are doing, we don't want your diff to fail and neither do you!!
Vertigo Performance Diff Spool doesn't just replace the spider gears in your diff cup leaving other diff components to fail. Our locker replaces the entire diff assembly in your Losi 5ive ensuring reliability within the differential.
- Add traction in the mud, sand and soft surfaces.
- Lockers are held in place using 4mm hardened steel pins and…
- Huge 12mm hex key means no broken bolts and with the large 8mm retaining bolt there will be no worries of clutch bell failure
- Tapered face for greater integrity where the shaft meets the bell.
- 1.5mm wall means there is less flex and the bell will last longer.
- Large vents at the side/face the extract clutch dust (and dirt when using an open carrier) to keep your clutch running clean, smooth and efficient.
- Machined from 1 piece billet steel,…