Vertigo Performance 9mm Hex Drive Steel Pinion Gear 22Teeth x1
NEW Larger 9mm Hex pinion gear for the larger Horsepower engines.
Will fit Vertigo 120652B 9mm Hex Bell on : Losi DBXL RCMK …
130933 Upper link mounts are now available..
We include 2 Socket head cap screws due to the design of the Vekta Diff housing. The rear cover has to tighten up to the diff housing to keep it sealed and at the same time tighten up to the upper link mount to keep it from moving, this requires some extra torque. In doing so we found it was easy to…
- Huge 12mm hex key means no broken bolts and with the large 8mm retaining bolt there will be no worries of clutch bell failure
- Tapered face for greater integrity where the shaft meets the bell.
- 1.5mm wall means there is less flex and the bell will last longer.
- Large vents at the side/face the extract clutch dust (and dirt when using an open carrier) to keep your clutch running clean, smooth and efficient.
- Machined from 1 piece billet steel,…
Engine mount inserts and screws for 20T & 22T Pinion gear by Vertigo
Note: The 20t and 22t inserts are the same size and work with both the 20t and 22t hex gear.
The new Losi 5IVE-T 2.0 truck is not directly compatible to these inserts. They fit, but the spacing size is different.
Fit Losi 5iveT Rovan LT KM X2 & DTT…
120652B Hex Drive bell.
HPI Baja Losi DBXL RCMK Hex Drive Steel Vented Clutch bell.
- 30 years of RC Experience has taught us that keeping a clutch cool and clean means less maintenance and frustration.
- Using our successful Hex key format we have designed a killer Clutch Bell Pinion set up for the DBXL/RCMK/Baja with High Horsepower engines.
- Huge 9mm hex key means no broken bolts and with the large 6mm retaining bolt there will be no worries of clutch bell…
100607 Centre diff brace Vertigo Centre diff brace prevents the center differential bulkheads from flexing which keeps the spur gear from hitting the clutch cover/carrier and prevents teeth on the spur and pinion gear from chipping. - Brace secures to any clutch housing with a top brace mounting hole and to Vertigo Clutch housings via 2 - 6mm bolts to ensure the brace won't come loose and to also prevent the premature stripping of threads of only one mounting…