Announcement

Store Is NOW OPEN Check out our Specials Page for some Great Bargains Team PRC

1/5 MARINE RC  3 & 4CH Kill Switch & LED Kit OZ Made

Aussie Designed & Made Electronic Kill Switch & LED for 1/5 2 Stroke Petrol RC

5GK is the 5th Generation of the 2-stroke Marine engine kill switch designed

and made in Australia. With new updated firmware and wider operating voltage. It works with most 3 & 4 channel radios. 5GK will automatically kill your Marine engine if you have a low battery, radio

glitch, lose connection, or power loss.

You can also kill the engine anytime you want via the transmitter's AUX channel switch. It kills the

engine by using a mechanical relay that gives a full electrical isolation.

The kit comes with 1 x EMF noise filtered cable with quick disconnect plug  and a remote super bright red LED indicator so the status signals can be seen externally

To mount the external LED on to your receiver box, drill an 8mm hole then slide the LED through

from the inside of the box and insert the LED into the LED clip then push the clip with the LED in

the hole until it stops.

LED Signal Status: Flashing - No Radio Signal

ON: Engine On (or Ready to Start)

OFF: Engine Off

Flashing/On - No Radio Signal / Engine Off (only applicable to Spektrum Radio)

Specification:

Operation Voltage on the receiver: 4.0 Volts DC to 8.0 Volts DC Relay Voltage Max: 125VAc, 24Vdc

Contact Relay Current DC Max : 1A Relay Coil Resistance : 167 Ohm External LED Clip dimension:

Panel Cut out diameter : 8mm

Clip Length : 12.5mm

 

Note: *Not compatible with any Spektrum Radio 2 channel Spektrum AVC receiver and  2 channel HPI TF-20  radio

For more information, please visit this products webpage.

Categories
Share Product
Share via E-Mail
Share on Facebook Share on Twitter