Announcement

Store is currently OPEN check out the SPECIAL OFFERS page for some great BARGAINS from Team PRC

Louise 1/8 MT-Cyclone MFT Sport Wheels & Tyres (2) 13mm Offset f 1Louise 1/8 MT-Cyclone MFT Sport Wheels & Tyres (2) 13mm Offset f 2

Fits

The 1/2-Offset makes your car about 25mm wider in total. We recommend the 1/2-Offset wheels over the 0-Offset wheels because you lower the risk of your tyres touching suspension or body components.

These tyre sets fits Front - Rear

o Most 1/8 Monster Trucks with 17mm wheel hex adapter

o Arrma - Kraton

o Arrma - Outcast

o Arrma - Notorius

o Hobao - Hyper MT

o HPI - Savage X4.6

o HPI - Savage Flux

o HPI - Savage XL

o Team Corally - Kronos

o Team Corally - Dementor

o Traxxas - E-Maxx Brushless

o Traxxas - Revo 3.3

o Traxxas - E-Revo Brushless

Please refer to our TYRE-WHEEL CAR CHART to verify if this Louise RC tyre set is suitable for your RC car.

Wheels

Due to the extreme loads during driving, cornering and high jumps, the design of the wheel and the materials used are extremely important. The proper flexibility and strength allow the Louise RC wheels to withstand these heavy forces.

The Louise RC wheels are made of a mixture of high quality nylon granulates, charged with fiber or without. These composites have been specially developed by Dupont® for Louise RC.

Tire inserts

The tyres are mounted either with special preformed foam inserts or with cut-to-size foam inserts. The inserts are selected in a specific density and size in order to guarantee perfect dampening and form stability of the tire.

Mounted - Glued

Due to the extreme forces the tyre must firmly bonded to the wheel. Louise RC takes the highest care in bonding the tyres properly. For years they have been searching to find the best way to glue the tires well but also in a clean way. Today Louise RC is considered one of the best in the RC industry. The tyres are glued with a special rubber cyanoacrylate glue. This glue has been specially developed for Louise RC to guarantee a perfect firm bond to withstand all extreme forces.

The following steps are performed in production at Louise RC in order to obtain a perfect bond;

o The rings of the rubber tyre to be glued are slightly grinded and degreased.

o The surface of the wheel where the tyre will be glued is grinded up and degreased.

o The tyre is bonded to the wheel with cyanoacrylate adhesive using a special dosing machine. As a result, the equal amount of glue is always applied.

o The bonded tyre is pressed for a specific time in order to ensure perfect bonding and curing.

o Each tyre passes a spinning and pulling test to ensure perfect bonding.

MFT Technology

MFT stands for Micro Fiber Technology. This technology indicates the presence of a textile belt in the rubber tread of the tyre to prevent the tyre from deforming and ballooning during high speed operations.

The MFT technology keeps the tire in shape, even during powerful accelerations and high-speed runs.

The well-known ballooning of a normal tyre without MFT technology that disturbs the entire shape and where the diameter of the tyre changes under these extreme conditions, is now part of the past. The MFT Technology provides increased stability, significant more road contact and the tire life is extended.

Important:

The tiye with MFT technology is usually a bit heavier and larger in size then normal tires without the MFT technology. We recommend to check your gear ratio and adjust if needed. We also recommend to update your steering servo as these tires provide more grip and may overload a standard servo.

MFT Technology

MFT stands for Micro Fiber Technology. This technology indicates the presence of a textile belt in the rubber tread of the tire to prevent the tire from deforming and ballooning during high speed operations.

The MFT technology keeps the tire in shape, even during powerful accelerations and high-speed runs.

The well-known ballooning of a normal tyre without MFT technology that disturbs the entire shape and where the diameter of the tyre changes under these extreme conditions, is now part of the past. The MFT Technology provides increased stability, significant more road contact and the tire life is extended.

Important:

The tyre with MFT technology is usually a bit heavier and larger in size then normal tires without the MFT technology. We recommend to check your gear ratio and adjust if needed. We also recommend to update your steering servo as these tyres provide more grip and may overload a standard servo.

SPORT Compound

Louise RC has years of experience in producing high performance tyres for RC cars. The RC hobby driver and the RC basher have totally different requirements for the tyres than the RC competition car driver. From this experience the special sports rubber compound has been developed. The sport rubber compound comes in 2 densities, soft or medium-soft. For the lighter 1/10 cars the soft compound is mainly used and for the more powerful and usually heavier 1/8 models the medium-soft compound is applied.

The SPORT rubber compound guarantees a tyre that;

o is particularly wear-resistant

o provides an outstanding road-handling and steering precision

o provides an excellent grip on the different types of surfaces

o is compatible with the high-power ratings of today's RC cars

Tech Specs

o Car Type: 1/8 Monster Truck

o Wheel Adapter: Hex 17mm

o Wheel Off-Set: 1/2"-Offset

o Wheel Color: Black

o Wheel Dia.: 3.8" - 97mm

o Wheel Type: Glued

o Wheel Material: Nylon Composite

o Tyre Techn.: MFT - Micro Fiber Technology

o Tyre Compound: Sport - Soft

o Tyre Size: 170x106mm

o Tyre Weight (1): N/A

all sizes are approx.

For more information, please visit this products webpage.