Displaying 1 to 10 (of 29 products)
Replacement Full Bearing Set for the Losi 5ive-T by FullForce…
- Manufacturer
- Team Fast Eddy
- Model
- losi5complet
Savox jumbo sized servos for all heavy duty applications such as 1/5th scale cars, large boats and aircraft. Built to handle load and power these 7.4v compatible, digital servos feature all steel metal geartrain, full ball bearings, heatsink case body and heavy duty horns and mounts.
Savox SV0236MG Features:
Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears
Super light-weight
High speed, incredible efficiency, and low power consumption
Extremely strong metal steel gears ensure long-life and durability
The full aluminum…
- Manufacturer
- Savox Servos
- Model
- 0326 savox
These are FF custom sized shock boots for the hot Losi 5ive-T. FF shock boots are designed to cover up your shocks and keep out unwanted dirt and debris. Made from high quality lycra fabric which make the shock boots extremely durable. Our special triple stitch method guarantees that our stitching will hold up and as an added bonus allows you to cut them to size without any problems! We are offering these in complete sets of four (front and…
- Manufacturer
- Full Force Products
- Model
- sm160lb
REAR Shock Tower Clearance NEW
5mm Thick alloy
Colour: Silver
Screws to fit
Will fit Rovan LT KMx2 30N DTT…
- Manufacturer
- Fast5Machine
- Model
- 97009si
- Quantity
- 1
Shimming your clutch bell properly is an important part of properly servicing and maintaining your RC. To much play can cause undue heat and alignment issues resulting in premature bearing failure.
This kit contains 4 shims.
2 x .1
2 x .3
With these units you can mix and match them for the perfect fit. Combinations will get you the following thicknesses:
.1,.2,.3,.4,.5,.6,.7,.8mm Perfect for any clutch system needs. For use with ALL Losi 5ive clutch bells…
- Manufacturer
- Team Fast Eddy
- Model
- sm235
- Quantity
- 1
- Huge 12mm hex key means no broken bolts and with the large 8mm retaining bolt there will be no worries of clutch bell failure
- Tapered face for greater integrity where the shaft meets the bell.
- 1.5mm wall means there is less flex and the bell will last longer.
- Large vents at the side/face the extract clutch dust (and dirt when using an open carrier) to keep your clutch running clean, smooth and efficient.
- Machined from 1 piece billet steel,…
- Manufacturer
- Vertigo Performance
- Model
- sm187
- Quantity
- 1
Rear wheel wells. They fit nice and clean on the inside of the wheel area and keep out dirt and gravel. Super easy install, just attach using the provided hardware. Four screws attach to the cage, two clips attach to the cage and get screwed to the wheel well.
These liners are laser cut from 0.060" thick solid plastic material which has a nice bit of texture on the inside. They will take all kinds of abuse at the track and…
- Manufacturer
- Full Force Products
- Model
- sm139R
- Quantity
- 1
Turtle Racing Losi 5ive-T 1.0/DBXL G320RC Billet Clutch Housing TUR-L0010
6061 Billet Aluminum G320 Clutch housing for Losi 5ive, Losi Desert Buggy XL (DBXL), MCD, Redcat, etc. This Clutch housing was made specifically for the New Zenoah G320RC motor. This will not fit the new 5IVE-T 2.0 model
Fits G320RC Engine only!
Cooling fins added - well proven for removing heat. This clutch housing will help cool your clutch and motor.
Much stronger than stock cast housing.
Made in the USA by Turtle Racing.
Available in…
- Manufacturer
- Turtle Racing
- Model
- sm106sv
- Quantity
- 1
Rear Shock Tower
5mm Thick alloy
Colour: Black
Screws to fit
Will fit Rovan LT & Losi 5T …
- Manufacturer
- Fast5Machine
- Model
- 97009 bl
- Quantity
- 1
Front Shock Tower / Mount
7075 Grade 5mm Thick alloy
Colour: Gunmetal
Screws to fit
Will fit Rovan LT SLT Losi 5T KM X2 DTT …
- Manufacturer
- Fast5Machine
- Model
- 151167
- Quantity
- 1
Displaying 1 to 10 (of 29 products)