NXE 7.4V 5000mAh 45C Hard Case Lipo Battery with Deans Connector
Dimensions : 139mm lg x 46.5mm w x 25.5mm h
Weight : 281.5 grams
all sizes approx.
**Before use make sure that your receiver and electronics are LiPo/high voltage compatible. Use with non-compatible electronics may damage your receiver/servos. Requires a LiPo battery charger. When not in use for extended periods it is suggested that the battery is placed in "Storage Mode" with your LiPo charger
Battery Charging Guide :
A basic estimate for a manual charger can be obtained by dividing the mAh rating of your batteries by the charging current. e.g. 2000 mAh batteries charged at 500 mA should require about 3.6 hours. It is recommend you stick with the basic estimate, as it is always preferable to undercharge batteries than overcharge them.
Batteries charging they should not be left unattended or power left on over the time estimated as damage may result .
Batteries should not be charged in confined space where overheating may occur
Keep Battery Charging away from any fuel source if on a Nitro or 2-Stroke RC
*BE SURE CAR IS SWITCHED OFF WHEN CHARGING OTHERW
For more information, please visit this products webpage.