Displaying 41 to 50 (of 76 products)
High Temp Silicone Tubing.
The coupling consists of simply a piece of …
- Manufacturer
- DDM
- Model
- fd115
- Quantity
- 5
High-performance silicone exhaust tubing. 13mm (1/2") inner diameter, 19mm (3/4") outer diameter. 500mm of tubing Inner reinforcing fibers for High-performance silicone exhaust tubing. 13mm (1/2") inner diameter, 20mm (3/4") outer diameter. 170mm of tubing Inner reinforcing fibers for extreme durability. Allow you to route your exhaust freely. Also provides SIGNIFICANT noise reduction when connected to stock mufflers or tuned pipes.
13mm ID 20mm OD
Wall 4mm
2 Ply.
*all sizes approx…
- Manufacturer
- DDM
- Model
- fd172
- Quantity
- 3
Silicone Exhaust tube 90 degrees. Just trim its size down to whatever you need
The tube has a 1/2" inner diameter, 3/4" outer diameter.
Tube is approx 8" x 3.25" in length.
…
- Manufacturer
- DDM
- Model
- fd175
- Quantity
- 6
Thread
M6
Compression
Capacity per Mount
50 lbs.
Deflection @ Maximum Capacity
0.06"
Shear
Capacity per Mount
15 lbs.
Deflection @ Maximum Capacity
0.10"
Height (A)
3/4"
Width (B)
1"
Thread
Length (C)
1/2"
Depth (D)
3/16"
Additional Specifications
Style 2—Male Threaded Stud on One End; Female Threaded Insert on One End
Neoprene
Metric Steel Stud and Insert
RoHS
Compliant
Diminish vibration, shock, and noise in compression and shear load applications. Mounts have two threaded studs and/or inserts that are sandwiched between black natural rubber or neoprene. Durometer is 50A, unless noted. Neoprene has good resistance to weather and acids; moderate resistance to oils. Temperature range is 10° to 180° F…
- Manufacturer
- DDM
- Model
- fd217b
- Quantity
- 1
DDM Dominator® brand pipe silencer.Mounts to most tuned pipes with 5/8" bleed to reduce noise. Includes silencer, heavy-duty mounting tube, and clamps
Will work with pipes: ADA S1, ADA S2, Engine Trix, Sikk Torque Pipe, Sikk M1 Pipe, PPS Pipe, Flowsystem Pipe, PacSales S25 Pipe, DDM Dominator for HPI and FG vehicles. Also fits Proline Racing 'rattlesnake' pipes when mounted to the 5/8" rattlesnake 'stinger'.
The length of the silencer body is 4.25" (108mm), and the width is 1.5" (38mm)
…
- Manufacturer
- DDM
- Model
- fd782
- Quantity
- 1
Set of two (2) 45-Degree Chrome elbows slide over stock stingers to deflect exhaust away from axle and wheel. Use Lock-tite (high temp threadlock) or epoxy to hold in place. Works on all X-cans.…
- Manufacturer
- DDM
- Model
- fd807
- Quantity
- 3
High temp reinforced Silicone tube. 13mm (1/2") inner diameter, 19mm (3/4") outer diameter. Inner reinforcing fibers for extreme durability. Includes two (2) 150mm (6") pieces of tubing. Use this on your Exhaust to route exhaust away from your vehicle…
- Manufacturer
- DDM
- Model
- fd818
- Quantity
- 1
This gear set is desiged for use with the 5B 5T SC Standard or upgraded Alloy Clutch system
Innovative design eliminates need for the spur gear carrier. This set includes an 16T pinion gear and 58T spur gear for an increase in Torque. Gears are heat treated, then finished off with a smooth black chromate coating.
Spur Gear Specifications:
Material - 1141 Steel
Heat Treat - Induction hardened teeth .010-.020 50-55 Deep…
- Manufacturer
- DDM
- Model
- gg800
- Quantity
- 1
This gear set is desiged for use with the Standard Cutch
Inovative design eliminates need for the spur gear carrier. This set includes an 19T TR pinion gear and 55T spur gear for a big increase in top speed. Gears are heat treated, then finished off with a smooth black chromate coating.
Spur Gear Specifications:
Material - 1141 Steel
Heat Treat - Induction hardened teeth .010-.020 50-55 Deep Rc
Finish…
- Manufacturer
- DDM
- Model
- gg805
- Quantity
- 2
DDM Black Magic Pinion Gear 16 T
Sale is for 1 x 16 T Pinion Gear for standard Clutches
16T & 17T Pinion Gear can be used with the stock 57 T spur gear
18T or 19 T Pinion gear can be used with 55T Spur Gear or 56T Spur Gear
20 T pinion…
- Manufacturer
- DDM
- Model
- gg812
- Quantity
- 12
Displaying 41 to 50 (of 76 products)