Now available from Bartolone Racing is the Billet clutch housing. This clutch housing is designed to fit Zenoah G23-290 RC Engines
This will fit all Zenoah engines 30.5cc and smaller, This housing will also fit Bartolone reed cases.
This will not fit the Zenoah G320RC/340RC engine.
Made in the USA from billet aluminium these are sold in a raw finish.…
Turtle Racing G320 Billet Clutch Housing TUR0029
6061 Billet Aluminum G320 Clutch housing for all Baja models. This Clutch housing was made specifically for the New Zen G320 motor.
Cooling fins added, well proven for removing heat. This clutch housing will help cool your clutch and motor.
Much stronger than stock cast housing.
Correct “under stud” length, no spacer needed.
Made in the USA by Turtle Racing.
Available in Raw
will only fit Zenoah G320 Engine
Will fit Baja 5B, SC 5T Predator RC Buggy and Desert…
Chung Yang 54mm stock clutch shoe and spring kit with 6000rpm spring. Now with longer-lasting clutch shoes! Bolt holes for the 2 mount bolts are 9mm in diameter.
HPI part # 15440.
This is the stock clutch setup for HPI Bajas and will bolt right onto a 5B, 5T, or 5SC. If you want your clutch to engage at a higher RPM, just change the spring to a high RPM one
Stock part on the
CY23 CY26 CY27 CY29 GP290 engines
…
Designed with the experienced Baja 5B enthusiast in mind, HPI Racing is proud to announce our High Response Clutch Shoe and Spring Set for the Baja 5B. The stock clutch setup in the Baja is good for most driving, but if you want your car to launch off the line with authority and use all of the power that the Baja has to offer, this is the set you need. The stock Baja 5B clutch starts to engage at 6000…
Turtle Racing Heavy Duty Gear Plate Raw for TR V2 clutch System setup
This TR Gear Plate eliminates the stock 3-piece assembly, including the plastic 2-piece block that holds the spur gear bearing. The TR Gear Plate has been designed with strengthening and cooling ribs around the spur gear bearing to help dissipate heat and add strength to the bearing journal. Proudly made in the USA!
1 x HD Gear Plate Raw for…
Clutch System TURV012 Silver
Product Description:
New Cooling fins- Runs average of 60% cooler than ANY carrier. Lower temps will provide increased clutch shoe and bearing life. Vented to allow hot gasses and dust to escape, this prevents gasses and dust from being forced into crank bearings and no dirt gets in.
Trans plate mount and carrier are now separate, this makes carrier easy on-off for maintenance of clutch or bearings. As easy to access as an open carrier. They are a perfect…