Displaying 1 to 10 (of 54 products)
Walbro WT-1242A High-Performance Carburetor w/ Seals
Now available is the Walbro WT-1242A carb. This is a factory Walbro carb modified with the highest performance upgrades offered. Made with the oversight of the master engine builders at OBR these carbs feature the upgrade spiral diaphragm, a unique metering spring tension, all teflon gaskets and ethanol resistant primer bulb installed. The 1242A carb features dust seals that protect the throttle shaft from debris and grit that lead to premature wear. These are the…
- Manufacturer
- Walbro
- Model
- av1242
- Quantity
- 1
WT-990 carburettors have been custom modified with high quality rubber-sealed bearings on each side of the throttle shaft. This mod helps with keeping sand and fine dust from entering via the shaft area via the weakest part, the carb shaft. When it enters it can gum up the shaft so that it binds, sticks open and in turn wears the carb shaft so it creates an air leak. This mod stops 99% of dust and sand from entering the carb…
- Manufacturer
- Walbro
- Model
- av990b
- Quantity
- 2
Genuine Walbro 1191 high-performance carburetor same specs as WT-1107. .
Specifications:
15.88mm bore
13.5mm venturi
high and low speed jets for easy tuning
This is a butterfly style carburettor with choke, includes the plastic choke lever screws & gaskets
*check screw lengths in your application on installation
Will…
- Manufacturer
- Walbro
- Model
- 67063
- Quantity
- 22
Billet Aluminum Zenoah G320RC / G320PUM Insulator Manifold Block with PTFE heat spacer gaskets for both cylinder and carburetor side.
This is the v2 version of the manifold, this version is the exact same thickness (spacers included) as the stock manifold setup, so no adjustment is required in R/C throttle linkage setups.
Fits Zenoah G320RC / G320PUM engine only.
Does NOT fit earlier Zenoah RC models!
replacement for Zenoah part # 585727001, won't warp in high heat.
Made in the USA of 6061 billet aluminum.…
- Manufacturer
- DDM
- Model
- av981
- Quantity
- 1
Walbro WT-998 Carburettor with Bolts and gaskets for 2 - Stroke Engine Walbro WT-998 same specs as 813 carby high performance carburettor for RC use. This Carby has an accelerator pump for increased fuel flow . Fits all Zenoah, CY, and PRC & Most 1/5 2 Stoke Engines engines. Same Specs as 813…
- Manufacturer
- Walbro
- Model
- 95076 998
Walbro WT-997 same specs as 668 Carburettor
for 2 - Stroke Engines
Walbro WT-997 high performance carburettor for RC use. This carby has integrated Choke. Fits all Zenoah, CY, and PRC & Rovan engines.
…
- Manufacturer
- Walbro
- Model
- 95053
- Quantity
- 10
Rofun / Rovan 997 Carby & Fuel line Set with grommet and in Tank Filter for 2 stroke Petrol engine grommet will fit 18mm hole
Carby Comes with Gasket & Screws
fit Predator RC King Motor & Rovan all models …
- Manufacturer
- Rovan / Rofun
- Model
- 67020 /85236
- Quantity
- 38
30°N 38cc Alloy Intake fit 32 , 36 & 38cc Engines with Teflon gaskets
30°N and Rovan Engines
…
- Manufacturer
- 30°North
- Model
- 50015
- Quantity
- 10
30°N 38cc Alloy Intake fit 26 - 30.5cc Engines with Carbon Fibre gaskets
30°N and Rovan Engines
…
- Manufacturer
- 30°North
- Model
- 50014
- Quantity
- 14
Specifications:
high and low speed jets for easy tuning
This is a butterfly style carburettor with choke, includes the plastic choke lever screws & gaskets
*check screw lengths in your application on installation
Will fit HPI Baja 5B, SS, 5T ,Predator RC Buggy and Desert Truck Models,KM Models HSP FG FS
…
- Manufacturer
- Rovan / Rofun
- Model
- 67075
- Quantity
- 21
Displaying 1 to 10 (of 54 products)