Displaying 21 to 30 (of 54 products)
WT-990 carburettors have been custom modified with high quality rubber-sealed bearings on each side of the throttle shaft. This mod helps with keeping sand and fine dust from entering via the shaft area via the weakest part, the carb shaft. When it enters it can gum up the shaft so that it binds, sticks open and in turn wears the carb shaft so it creates an air leak. This mod stops 99% of dust and sand from entering the carb…
- Manufacturer
- Walbro
- Model
- av990b
- Quantity
- 2
Billet Aluminum Zenoah G320RC / G320PUM Insulator Manifold Block with PTFE heat spacer gaskets for both cylinder and carburetor side.
This is the v2 version of the manifold, this version is the exact same thickness (spacers included) as the stock manifold setup, so no adjustment is required in R/C throttle linkage setups.
Fits Zenoah G320RC / G320PUM engine only.
Does NOT fit earlier Zenoah RC models!
replacement for Zenoah part # 585727001, won't warp in high heat.
Made in the USA of 6061 billet aluminum.…
- Manufacturer
- DDM
- Model
- av981
- Quantity
- 1
Walbro Rebuild Kit Walbro part # K20-WAT
Walbro WT668 WT 997 WT 499 WT 603 WT 1107 carbies .…
- Manufacturer
- Walbro
- Model
- Av515
- Quantity
- 9
Zenoah carburetor gasket. Works with Walbro WA / WT carburetors.
Zenoah part # T2075-14120
FG part # 07337
Stock Part on the Zenoah
G230 260 240 270 290RC
260PU, 231PUM, 260PUM, 231PUH, 260PUH
Can be used to replace CA611 on the
Chung Yang CY23 26 27 29 GP290 motors…
- Manufacturer
- Zenoah
- Model
- av501
- Quantity
- 6
Walbro Small Parts Cleaning Tool
…
- Manufacturer
- Walbro
- Model
- av497
- Quantity
- 2
Primer Bulb for Walbro Carburettors
Replacement primer bulb for Walbro carburetors. Fits WA-167, WT-603, WT-643, WT-644, WT-668, WYK-33, WYK-58, etc.
Zenoah part # 1751-81510
FG part # 07373
Walbro Part # 188-12…
- Manufacturer
- Walbro
- Model
- av489
- Quantity
- 9
Walbro Rebuild Kit Walbro part # K10-WAT
Walbro WT-813 / WT-990 / WT-257 / WA-167 / WT-771 …
- Manufacturer
- Walbro
- Model
- Av450
- Quantity
- 8
Walbro WT-1242A High-Performance Carburetor w/ Seals
Now available is the Walbro WT-1242A carb. This is a factory Walbro carb modified with the highest performance upgrades offered. Made with the oversight of the master engine builders at OBR these carbs feature the upgrade spiral diaphragm, a unique metering spring tension, all teflon gaskets and ethanol resistant primer bulb installed. The 1242A carb features dust seals that protect the throttle shaft from debris and grit that lead to premature wear. These are the…
- Manufacturer
- Walbro
- Model
- av1242
- Quantity
- 1
CNC Carburettor Pull Tab Silver
fit walbro WT carby
**some screw threads may not fit the screw…
- Manufacturer
- Fast5Machine
- Model
- 95278
- Quantity
- 10
Carburettor Heatsink Intake Manifold Billet
Features :
Billet Intake with cooling Fins dissipates the heat
Designed to get increased air intake into your Carby
Stronger than standard plastic intake which tend to warp
With Teflon & Standard Gaskest
Screws to fit
Silver anodised
Will fit Most 1/5 RC…
- Manufacturer
- Fast5Machine
- Model
- 95273 sil
- Quantity
- 5
Displaying 21 to 30 (of 54 products)